- Stock: In Stock
- Model: SC36-50
Our Preformed 3/16” Saw-cut Loop is perfectly suited for installations requiring a 3/16” or wider trench to be made in concrete or asphalt. In these setups, the wire is inserted and then sealed into the surface with a loop sealant. Discover how BD Loops Saw-Cut Loops can expedite installation, potentially saving up to 45 minutes per loop.
Equipped with a robust polyethylene jacket, these saw-cut loops safeguard the enclosed nylon-coated, polyethylene-insulated 16AWG stranded wire. A standout feature of BD Loops Saw-Cut Loops is the integrated wing-shaped backer-rod, ensuring a tight fit within a 3/16” saw-cut trench. Our innovative wire configuration eliminates the need for additional backer-rod installation, achieves an effective seal at the trench base, and offers a smooth surface for sealant application. This not only simplifies the sealing process but also reduces sealant usage by at least 30% compared to manually wrapped wires in a ¼” trench.
Designed to fit entirely within a 3/16” saw-cut trench, our loop avoids needing multiple cuts or using double blades to accommodate the home run lead-in, saving valuable installation time.
Wondering if you need a perfectly sized pattern to utilize our loop?
Absolutely not! Our Saw-Cut loops are forgiving; as long as the saw-cut pattern doesn't exceed the loop size (since preformed loops cannot be stretched), our loop will fit every time. We've engineered our Saw-Cut loops to accommodate excess lead-in loop, allowing for a reduction in loop size if needed.