This single-post SwingRiser opens or closes a gate leaf, up to 1,000 lb and 9 ft width, in 14 seconds. The HydraSupply, electrical controls, and manual override are remotely located in a separate enclosure, up to 100 ft from the gate. SwingRiser posts are zinc flame sprayed for superior corrosion resistance. Standard SwingRiser posts are 80 inches (203 cm) tall, assembled as left hand or right hand and inward swing or outward swing, as well as 90°or 100°swing. Custom height SwingRiser posts can be ordered to fit your gate size. Ordering the correct SwingRiser configuration is critical as the speed and all elements described above cannot be field reconfigured. HySecurity provides a SwingRiser Order Form that must accompany every order to ensure accuracy and customer satisfaction.
Easily configure gate operation to specific site requirements with unique and unequaled Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload the latest software, troubleshoot system and save operator configurations. Programmable dual gate or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.
Monitor gate system and accessory status, system operational malfunctions, maintenance alerts, or gate breach alarms. Communicate security or operational events to security command and control or service technician in real-time via Ethernet/fiber using optional web-based HyNet™ Gateway. Target specific security and operational alerts to specific recipients. View or download 16,000 plus events (logged in non-volatile memory) from a remote location or on-site for precise and quick system troubleshooting. Operate and configure gate remotely.
SwingRiser Twin
SWINGRISER 14-TWIN is an extremely-reliable and elegant, continuous duty, industrial grade, hydraulic swing gate operator. Its graceful, smooth lift and swing raises gate leaf a full 12 inches during the gate open cycle to clear obstacles like snow, rocks, curbs and road inclines. Optional locking pin mechanically locks when the gate gently lowers at end of its cycle. Frequently chosen for high profile or high-security locations, HySecurity’s unique SwingRiser solves specialized site challenges with finesse.
This twin-post SwingRiser opens or closes gate leaves, up to 1,000 lb and 9 ft width each, in 14 seconds. The HydraSupply, electrical controls, and manual override are remotely located in a separate enclosure, up to 100 ft from the gate. SwingRiser posts are zinc flame sprayed for superior corrosion resistance. Standard SwingRiser posts are 80 inches (203 cm) tall, assembled as left hand or right hand and inward swing or outward swing, as well as 90° or 100° swing. Custom height SwingRiser posts can be ordered to fit your gate size. Ordering the correct SwingRiser configuration is critical as the speed and all elements described above cannot be field reconfigured. HySecurity provides a SwingRiser Order Form that must accompany every order to insure accuracy and customer satisfaction.
Easily configure gate operation to specific site requirements with unique and unequaled Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual gate or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.
Note: The top of the SwingRiser post must be mounted to a structural column or wall that will support the entire weight of the swing gate panel throughout its arc. Excessive speed, insufficient column support or insufficient footings may cause gate sag, premature post and actuator wear and other serious operator malfunction. HydraSupply enclosure may be located up to 100 ft (30.5 m) from post. For longer than 100 ft runs, call HySecurity for hose specifications. Up to 100 ft (30.5 m) runs require 1/4 inch hose/fittings. For runs longer than 50 ft (15 m) AND installed in cold climates, which routinely get below 0° F (18° C), use 3/8 inch braided hose. Operator price includes up to 50 ft (15 m) of 1/4 inch hydraulic hose (custom cut to size by HySecurity according to installer''s field measurements). Hoses are pre-filled with hydraulic fluid and supplied with quick disconnects. Submit completed and signed operator and hose order forms with each order.